Official Luthiers Forum!

Here is a link to a handy chart I made that covers solutions to most common problems encountered when spraying finish.

http://howardguitars.blogspot.com/2015/ ... rt_18.html

And while you're there if you haven't already, check out the rest of my blog.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/

Good data!

Reaffirms my decision to contract out...

When I first saw the topic, I thought someone was looking for some answers, and I though to myself, hopefully Brian Howard will help out. Then I read it!
Thanks for posting this, Brian.

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker

Very interesting stuff on your blog. Well done !!! And thank you

_________________
Joe Beaver
Maker of Sawdust

So let me get this straight, if your having finish problems it is either you are going too fast or too slow, you are either too far away with the gun or too close, it's too hot, it's too cold, too humid, too dry, your mixture is too thin, your mixture is too thick or it's the second Saturday of a month ending in y
All you have to do is do it right and you'll be ok

Good stuff on your blog. Thanks for sharing

_________________
Say what you do, Do what you say.

Great blog, Brian! Lots of useful information there. I need to start updating mine again...